Loading... Please wait...

Our Newsletter

Jebao CF-10 Bio-Pressure UVC Pond Filter

Calculated at checkout

Product Description

Item number: CF-10

Bio-Pressure UVC Pond Filter CF10

7W UVC light pond filter has back flushing function

Simply back flush the unit to clean the filter and it is ready to continue its work.

Unit Volume: 2.5 gallons
Ponds size: 1000 gallons
Water in/out connector size: 3/4", 1", 1 1/4" and 1.5"
Reguired Pump Flow rate: 400GPH (pump not included)

UV(W): 7W (included)
Unit size:13.5(Dia)"x24"(H)
Power cord: 14.5'(filter to adaptor)+6'(adaptor to wall plug)

How does it work? 
Stage 1 - Mechanical Filtration 
Pond water is pumped into the filter creating the necessary pressure to begin three mechanical filtration stages-coarse, medium-coarse and fine filtration. Each phase uses a specially designed foam sponge to effectively remove all sizes of unwanted debris. 
Stage 2 - Biological Filtration 
This stage uses bio-balls providing a habitat for beneficial bacteria to grow. These bacteria naturally convert harmful ammonia and other wastes into healthy nitrates that fertilize aquatic plants and support a healthy pond environment. 
Stage 3 - UV Filtration 
The final filtering stage uses a low voltage, Ultra-Violet(UV) light, Exposure to the UV light kills algae as the water passes through the filter on its way back to your pond.

The balls should be put in evenly, filter needs to be cleaned once a while depending on water condition. Maybe as much as once a week depending on water condition, dirt building up, too much, could cause leaking. A dirty filter will generate a lot of extra pressure. Also keep in cooler area , less direct sun if possible. Maybe dig a hole and sit at least half or more of the CF filter in it  by putting sand in the bottom of the hole you can secure the filter in position. For the CF-10 400 GPH pump might also help. For the CF-30 we suggest 1200GPH pump flow. 


Find Similar Products by Category

Write your own product review

Product Reviews

  1. No good directions 2 Star Review

    Posted by on 7th Apr 2013

    There wasn't any good directions with the filter. I also got a replacement uv bulb, don't know where it goes. Also can't get it sealed when closing it. Not sure how to put the o ring on it. How do I get a new o ring?